Omega Vehicle Security HH506 User Manual

OMEGAHH506Digital Thermometer

Hi/Lo LIMITS mode (only Main display)Press Hi/Lo LIMITS key to enter the Hi/Lo Limits comparative mode,"LIMIT" is displayed. In the this mod

3. Time set mode, (Press ENTER key can escape Time set mode) = = : = == =is displayed in third display. Time (hours, minutes, seconds) value isentered

10OPERATOR MAINTENANCEWARNINGTo avoid possible electrical shock, disconnect the thermocoupleconnectors from the thermometer before removing the cover.

1HH 506(R)/HH 507(R) CALIBRATION PROCEDURENote: The following calibration procedure should perform only by qualified technicianswho have access to the

WARRANTY / DISCLAIMEROMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 monthsfrom date

M-2811/0799Where Do I Find Everything I Need forProcess Measurement and Control?OMEGA...Of Course!TEMPERATUREþ Thermocouple, RTD & ThermistorProbe

OMEGAnetSM On-Line Servicehttp://www.omega.comInternet [email protected] North America:USA: ISO 9001 Certified Canada:One Omega Drive, Box

1The symbol on the instrument indicates that the operator must refer to anexplanation in this manual.WARNINGTo avoid electrical shock, do not use th

2SPECIFICATIONSELECTRICALTemperature Scale: Celsius or Fahrenheit user-selectableMeasurement Range:Thermocouple RangeK-TYPE -200°C to 1372°C, -328°F t

3Accuracy: Accuracy is specified for operating temperatures over the range of18°C to 28°C (64°F to 82°F), for 1 year, not including thermocouple error

4ENVIRONMENTALAmbient Operating Ranges: 0°C to 50°C (32°F to 122°F) <80% R.H.Storage Temperature: -20°C to 60°C (-4°F to 140°F) <70% R.H.GENERAL

5OPERATING INSTRUCTIONS Power SwitchThe key turns the thermometer on or off. In the MIN MAX record modecan not power off, must leave MIN MAX

6T1 T2/T1-T2 Main display Input SelectionThe input selection indicates which input is selected for main display; T1thermocouple, T2 thermocouple or th

7The true average of all the reading taken over at least 22 hours preiod canbe displayed. If 22 hours is exceeded, new averages are no longercalculate