Omega Vehicle Security OMB-NETSCAN 1500 User Manual download pdf (Page 95)

NetScan User’s Manual,

11-06-98

PostView 5-13

Adding a Chart to Group 1

Change the number of charts per group if desired.

Change the group name if desired.

Click on a group to see the chart(s) assigned to the group. In the above example there is one group

with one chart.

Click on a chart to assign channels to the chart. A screen similar to the following will appear.

Assigning Channels to Chart 1 of Group 1

Choose channels for the selected chart. You can select up to 4 overlapping channels per chart. There

are four methods of adding channels. These are as follows:

•

Highlight an available channel using the cursor and left-hand mouse button; then click the Add button. Repeat for

each channel to be added.

•

Double-click on the channel (in the available channels list to add; in the selected channels list to remove)

•

Hold down the keyboard’s

Shift Key

and use the left-hand mouse button to select a block of consecutive available

channels (up to 4); then click the Add button. Example: CH3, CH4, CH5,and CH6.

•

Hold down the keyboard’s Ctrl button and use the left-hand mouse button to select up to 4 available channels

(these can be non-consecutive); then click the Add button.

Example: CH1, CH3, CH5, and CH7, as in the previous figure.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 255 256

No comments

Omega Vehicle Security OMB-NETSCAN 1500 User Manual Page 95